MIG welder HDC Kansas 350

Code: 961955
Vendor code: HD-KNS350-E3
Barcode: 8210803861179 ( )
Dimensions LxWxH, cm: 100 x 50 x 70
Weight with packaging, kg: 91.87
Prices
Last price
1 537,20 $
Remainings
In stock Ningbo
pcs.

Advantages:

380 V, MIG/FLUX/MMA, Euro connector, synergetic mode

Barcode: 8210803861179 ( )
Dimensions LxWxH, cm: 100 x 50 x 70
Weight with packaging, kg: 91.87

Equipment:

Welding machine inverter type for professional use. The device can be used both in semi-automatic welding mode and in manual electrode welding mode. The device is equipped with a remote wire feed module with a 4-roller mechanism and a holder for spools with a diameter of up to 300 mm and a wire weight of up to 15 kg. --- Advantages: - 2-in-1 - semi-automatic and manual welding; - Microprocessor control - 32-bit ST microprocessor on ARM architecture; - remote wire feed module with cable harness 5 meters - large radius of action; - 4-roller wire feeder; - Synergic and manual mode for MIG/MAG welding; - Intensive work with wire up to 1.2 mm (in manual mode - 1.6 mm can be used - in non-intensive mode); - Work with electrodes up to 8 mm in diameter; - High duty cycle and efficient cooling for intensive work; - Two displays for precise control of parameters; - 2T/4T modes, - Adjustment of arc dynamics; - 36V~ connector on the rear panel for connection heating of the gearbox; - Gas purge after welding for additional protection of the weld; - Transport wheels for easy movement of the welding station; - Area tank for carbon dioxide cylinder; --- Specifications: Nominal supply voltage: ~380V; Supply network frequency: 50/60 Hz; Network type: 3-phase; No-load voltage: 70 V; Rated output (MIG/MAG): 40 A / 16 V - 350 A / 31.5 V; Rated output (MMA): 40 A / 21.6 V - 350 A / 34 V; Duty cycle (DC) at max. current: ; at 40°C (EN 60974-1): 60%; at 20°C: 95%; Nominal input current: 19.8 A; Maximum allowable input current: 25.5 A; Wire diameter: 0.8 mm / 1.0 mm / 1.2 mm / 1.6 mm*; Electrode diameter: 2.5-8.0 mm; Efficiency: 0.85; Power factor: COS 0.92; Insulation class: H; Protection class: IP21S; Weight (without accessories): 75.5 kg; Overall dimensions (LxWxH): 840x320x1340 mm; Warranty period: 12 months; --- *1.6 mm - only in manual mode. Synergic mode is not available. --- Complete set: 1. Power supply; 2. Wire feed module; 3. Electrode holder with 3 meters cable; 4. Ground terminal with 3 meters cable; 5. Cable harness for connection of the power source and the wire feed module 5 meters; 6. Gas hose 7 meters (as part of the cable harness); 7. Feed roller 1.2 / 1.6 mm - 2 pcs (installed in the wire feeder); 8 Feed roller 0.8/1.0 mm - 2 pcs; Attention! For the convenience of individualizing the welding machine, the welding torch is not included in the delivery set and must be purchased separately. with 1.2 mm wire - it is recommended to use a torch no lower than 36 series. mm; WG-25AK3 Torch Solaris 3 meters for wire 1.0 mm; WG-25AK5 Torch Solaris 5 meters for wire 1.0 mm; WG-36KD3 Torch Solaris 3 meters for wire 1.2 mm; WG- 36KD5 Torch Solaris 5 meters for wire 1.2 mm; H-300C Electrode holder 300 A; H-500C Electrode holder 500 A; WA-2474 Connector 35-50 mm2 Solaris (male); WA-2476 Panel connector 35-50 mm2 Solaris (female); WA-2478 Extension connector 35-50 mm2 Solaris; WM-6110 SOLARIS non-stick spray;

Similar products:

Vendor code: MIG-201
MIG welder SOLARIS MIG-201
Vendor code: MIG-205P
MIG welder DGM MIG-205P
Vendor code: AS1570-6
FLUX welder ASILAK M2005
Vendor code: MIG-200EM
MIG welder SOLARIS MIG-200EM
Vendor code: MULTIMIG-221
MIG welder SOLARIS MULTIMIG-221

We use cookies for your convenience in using the site and to improve the quality of recommendations.