We use cookies for your convenience in using the site and to improve the quality of recommendations.
MIG welder SOLARIS TOPMIG-226 (160-240 V~, 30-200 A, MIG/FLUX, polarity change, 2T/4T, euro connector, 3 m torch)
Vendor code:
SL5712-5
Prices
Recommended retail price USD excluding VAT
267,38
$
Remainings
In stock Ningbo
pcs.
Characteristics:
- Nominal supply voltage
- ~ 230 V
- Permissible supply voltage range
- ~ 160–~ 240 V
- Supply Frequency
- 50 Hz
- Network type
- 1 phase
- Open circuit voltage
- 89 V
- Welding current (MIG)
- 30–200 A
- Nominal wire feed speed
- 2–11 m/min
- Duty cycle (DC) at max. current
Advantages:
■ Euro connector for the torch;
■ - Torch WG-15AK (3 meters) included;
■ - Size of the installed coil up to 5 kg / 200 mm;
■ - Possibility of changing the polarity for welding with wire without gas (FLUX);
■ - Wire feed adjustment function;
■ - 2T/4T mode (for MIG);
■ - IGBT transistors;
■ - Metal wire feed mechanism;
| Barcode: | 6978018610679 |
| Dimensions LxWxH, cm: | 43 x 21 x 33.5 |
Description:
Inverter welding machine that allows welding in the following modes: - semi-automatic welding mode in a protective gas environment MIG/MAG; - semi-automatic welding mode with flux-cored wire without the use of protective gases FLUX; The device is equipped with a Euro connector for the torch, the ability to change the polarity for welding with wire without gas (FLUX); Attention! The torch in this model is supplied in a separate box;
Equipment:
+ Inverter semiautomatic
+ Welding torch WG-15AK 3 meters
+ Gas hose with two clamps
+ Ground terminal with cable 2 meters
+ Feed roller for V-type wire 0.6 - 0.8 mm (installed in the wire feed mechanism), feed roller for K-type wire 0.8 - 1.0 mm
+ Contact tubes (tips) 0.8 mm (1 pc., installed on the torch), 0.8 mm (1 pc.), 1.0 mm (1 pc.)
+ Sealing ring for contact tube (tip) (2 pcs)
+ Documentation
+ Box for welding torch
+ Box
Compatible products:
E-400M Solaris magnetic ground terminal
E-600M Solaris magnetic ground terminal
WM-6110 Non-stick spray
Non-stick spray: art. WM-6110
WM-ER70S6-06010 ER70S-6 welding wire (copper-plated) 0.6 mm, 1 kg; WM-ER70S6-06050 Welding wire ER70S-6 (copper-plated) ф0.6 mm, 5 kg
Advantages:
■ Euro connector for the torch;
■ - Torch WG-15AK (3 meters) included;
■ - Size of the installed coil up to 5 kg / 200 mm;
■ - Possibility of changing the polarity for welding with wire without gas (FLUX);
■ - Wire feed adjustment function;
■ - 2T/4T mode (for MIG);
■ - IGBT transistors;
■ - Metal wire feed mechanism;
| Barcode: | 6978018610679 |
| Dimensions LxWxH, cm: | 43 x 21 x 33.5 |
Description:
Inverter welding machine that allows welding in the following modes: - semi-automatic welding mode in a protective gas environment MIG/MAG; - semi-automatic welding mode with flux-cored wire without the use of protective gases FLUX; The device is equipped with a Euro connector for the torch, the ability to change the polarity for welding with wire without gas (FLUX); Attention! The torch in this model is supplied in a separate box;
Equipment:
+ Inverter semiautomatic
+ Welding torch WG-15AK 3 meters
+ Gas hose with two clamps
+ Ground terminal with cable 2 meters
+ Feed roller for V-type wire 0.6 - 0.8 mm (installed in the wire feed mechanism), feed roller for K-type wire 0.8 - 1.0 mm
+ Contact tubes (tips) 0.8 mm (1 pc., installed on the torch), 0.8 mm (1 pc.), 1.0 mm (1 pc.)
+ Sealing ring for contact tube (tip) (2 pcs)
+ Documentation
+ Box for welding torch
+ Box
Similar products:
Vend.: MIG-205P
160-240 V~, 20-200 A, MIG/FLUX/MMA/TIG, polarity change, 2 m built-in torch
142,73
$
Vend.: MULTIMIG-224
160-240 V~, 10-220 A, MIG/SPOT/FLUX/MMA, polarity change, 2T/4T, euro connector, 3 m torch
307,73
$
Vend.: HD-KNS350-E3
Vend.: HD-KNS500-E3
Vend.: AS1570-6
150-240 V~, 20-180 A, FLUX/MMA/TIG LIFT, bayonet connector,gasless welding
95,90
$