We use cookies for your convenience in using the site and to improve the quality of recommendations.
MIG welder SOLARIS MULTIMIG-245
Vendor code:
SL5712-4
Prices
Recommended retail price USD excluding VAT
419,03
$
Remainings
In stock Ningbo
pcs.
Characteristics:
- Power supply voltage
- 160–240 V
- Power supply Frequency
- 50 Hz
- Network type
- 1 phase
- Open circuit voltage (MIG / MMA / TIG LIFT)
- 65 V / 65 V / 12.3 V
- Welding current (MIG)
- 30–240 A
- Welding current (MMA)
- 30–200 A
- Welding current (TIG)
- 20–240 A
- Duty cycle (DC) at max. current
Advantages:
■ 3m torch with EURO connector;
■ - 3 in 1 (MIG MMA TIG lift DC);
■ - Microprocessor control;
■ - The device operates on 4 IGBT transistors, which makes it a more reliable solution;
■ - High duty cycle of the device 60% at 20C;
■ - Size of the installed coil up to 5 kg 200 mm;
■ - Possibility of changing polarity for welding with wire without gas (FLUX);
■ - Stable operation in networks with low voltage (from 160V);
■ - Modes 2T/4T/Spot (MIG);
■ - Setting the welding time Spot Time (MIG);
■ - Synergic setting STAINLESS, FLUX, CO2, MIX CO2 + Ar (MIG);
■ - Function of selecting the diameter of the installed welding wire (MIG);
■ - Setting the feed speed of the welding wire (MIG);
■ - Arc inductance adjustment (MIG);
■ - Setting additional welding parameters Pre Gas, Start WFS, Burn Back, Post Gas (MIG);
■ - Arc force intensity adjustment (MMA);
■ - HotStart, AntiStick functions (MMA);
■ - Gas valve activation function for checking the shielding gas flow;
■ - Feed mechanism activation function for threading the welding wire;
■ - 2 m network cable (without network plug);
■
■ ATTENTION! Some accessories (torch, gas hose, spare contact tips, clamp) are located inside the wire feed compartment.
| Barcode: | 6977125192696 |
| Dimensions LxWxH, cm: | 55 x 33 x 50.5 |
| Weight with packaging, kg: | 20 |
Description:
Multifunctional inverter welding machine, allowing welding in the following modes: - mode of semi-automatic welding in a protective gas environment MIG/MAG; - mode of semi-automatic welding with flux-cored wire without the use of protective gases FLUX; - mode of manual arc welding with coated electrodes MMA; - mode of argon-arc welding with direct current LIFT DC TIG (valve-type torch is purchased separately).
Equipment:
+ Ground terminal with 3-meter cable
+ 2-meter gas hose
+ 2 clamp ties
+ V-type wire feed roller 0.6-0.8 mm (installed in the wire feed mechanism)
+ K-type wire feed roller 0.8-1.0 mm (additional for FLUX flux-cored wire
+ A set of spare contact tips (0.6 mm - 3 pcs. 0.8 mm - 5 pcs. 1.0 mm - 5 pcs)
+ Torch maintenance key
Compatible products:
WM-6110 Non-stick spray SOLARIS
WA-2461 Welding torch maintenance key
33963 Power plug 32A industrial
VP32-922 Power plug 32A industrial
JP7602-01 Plug 16 A (not suitable for work at max currents)
SQ0612-0001 Plug 16 A (not suitable for operation at max currents)
Advantages:
■ 3m torch with EURO connector;
■ - 3 in 1 (MIG MMA TIG lift DC);
■ - Microprocessor control;
■ - The device operates on 4 IGBT transistors, which makes it a more reliable solution;
■ - High duty cycle of the device 60% at 20C;
■ - Size of the installed coil up to 5 kg 200 mm;
■ - Possibility of changing polarity for welding with wire without gas (FLUX);
■ - Stable operation in networks with low voltage (from 160V);
■ - Modes 2T/4T/Spot (MIG);
■ - Setting the welding time Spot Time (MIG);
■ - Synergic setting STAINLESS, FLUX, CO2, MIX CO2 + Ar (MIG);
■ - Function of selecting the diameter of the installed welding wire (MIG);
■ - Setting the feed speed of the welding wire (MIG);
■ - Arc inductance adjustment (MIG);
■ - Setting additional welding parameters Pre Gas, Start WFS, Burn Back, Post Gas (MIG);
■ - Arc force intensity adjustment (MMA);
■ - HotStart, AntiStick functions (MMA);
■ - Gas valve activation function for checking the shielding gas flow;
■ - Feed mechanism activation function for threading the welding wire;
■ - 2 m network cable (without network plug);
■
■ ATTENTION! Some accessories (torch, gas hose, spare contact tips, clamp) are located inside the wire feed compartment.
| Barcode: | 6977125192696 |
| Dimensions LxWxH, cm: | 55 x 33 x 50.5 |
| Weight with packaging, kg: | 20 |
Description:
Multifunctional inverter welding machine, allowing welding in the following modes: - mode of semi-automatic welding in a protective gas environment MIG/MAG; - mode of semi-automatic welding with flux-cored wire without the use of protective gases FLUX; - mode of manual arc welding with coated electrodes MMA; - mode of argon-arc welding with direct current LIFT DC TIG (valve-type torch is purchased separately).
Equipment:
+ Ground terminal with 3-meter cable
+ 2-meter gas hose
+ 2 clamp ties
+ V-type wire feed roller 0.6-0.8 mm (installed in the wire feed mechanism)
+ K-type wire feed roller 0.8-1.0 mm (additional for FLUX flux-cored wire
+ A set of spare contact tips (0.6 mm - 3 pcs. 0.8 mm - 5 pcs. 1.0 mm - 5 pcs)
+ Torch maintenance key
Similar products:
Vend.: MULTIMIG-224
160-240 V~, 10-220 A, MIG/SPOT/FLUX/MMA, polarity change, 2T/4T, euro connector, 3 m torch
307,73
$
Vend.: HD-KNS350-E3
Vend.: MIG-205P
160-240 V~, 20-200 A, MIG/FLUX/MMA/TIG, polarity change, 2 m built-in torch
142,73
$
Vend.: MIG-200EM
160-240 V~, 10-180 A, MIG/FLUX/MMA, polarity change, 1 kg reel, 2 m built-in torch
193,05
$
Vend.: MULTIMIG-227
160-240 V~, 10-220 A, MIG/SPOT/FLUX/MMA/TIG, polarity change, 2T/4T, euro connector, 3 m torch
378,57
$