MIG welder SOLARIS ALUMIG-230DP SYNERGY (160-240 V~, 10-200 A, MIG/SPOT/FLUX/MMA/TIG/PULSE/DP, synergy, euro connector, 3 m torch)

Vendor code: SL1539-2

Video

Barcode: 8213112892452
Dimensions LxWxH, cm: 51.5 x 38.2 x 37.7
Weight with packaging, kg: 15.233
Prices
Recommended retail price USD excluding VAT
0,00 $
Remainings
In stock Ningbo
remainder icon
pcs.

Characteristics:

Wire diameter used
0.6–1.0 mm
Gas fitting
9 mm
Input voltage
160–240 V~
Network type
1 phase
Open circuit voltage
80 V
Rated input current
11.5 A
Maximum input current
25.6 A
Power factor
COS 0.7
All characteristics

Advantages:

■ Microprocessor control.
■ LCD display with an intuitive interface even for novice users.
■ Synergetic management programs.
■ Pulse and double pulse modes.
■ The machine comes with a set of accessories for welding aluminum.
■ Semi-automatic welding with manual settings for experienced users.
■ Semi-automatic SPOT welding with adjustable welding time.
■ Welding with flux-cored wire without the use of shielding gas.
■ MMA manual arc welding.
■ Welding using a SPOOL GUN torch. SPOOL GUN mechanized burner is purchased
■ as an additional accessory.
■ TIG LIFT argon arc welding with touch ignition. A valve-type TIG torch is purchased as an additional accessory.
■ High duration of activation of the device 60% at 20 °C.
■ Memory function of configured programs (5 slots).
■ The size of the installed coil is up to 5 kg / 200 mm.
■ Stable operation in networks with reduced voltage (from 160 V).
■ Welding mode with short and long stitches 2T/4T (for MIG).
■ Adjusting the arc inductance changes the penetration depth and bead shape of the MIG weld.
■ Adjusting the intensity of the ArForce arc (MMA).
■ Adjusting the intensity of the initial ignition HotStart (MMA).
■ AntiStick (MMA) functions.
■ Function of safe open circuit voltage VRD (MMA).
■ Network cable 2 m (without power plug).
■ Noise filter to protect other devices from interference.
Barcode: 8213112892452
Dimensions LxWxH, cm: 51.5 x 38.2 x 37.7
Weight with packaging, kg: 15.233

Description:

Note! The device is supplied without a plug. In case of operation at maximum currents, the device must be equipped with a 32A 230V single-phase power plug (not included). Description of modes: Synergetic programs allow you to configure the semi-automatic machine in two steps, even for an inexperienced user. Set the material to be welded, its thickness and wire diameter - the machine will set all other settings itself. The pulse mode allows you to weld thin metals due to less heat input, and the double pulse mode is especially good for welding aluminum. The machine comes with a set of accessories for welding aluminum. Semi-automatic welding with manual settings for experienced users. In this mode, the device is configured in the classical way - voltage and wire feed speed. Semi-automatic welding with adjustable welding time. The mode is useful for many identical spot welds, or when spot welding thin metals to avoid overheating and deformation. Semi-automatic welding with flux-cored wire without the use of shielding gas. Semi-automatic welding using a torch with a built-in wire feed mechanism. The SPOOL GUN is available as an additional accessory. Classic manual arc welding with a covered electrode. Adjustments for the hot start, arc force and VRD safe no-load voltage functions are available. Argon arc welding with tungsten electrode with touch ignition. A valve-type TIG torch is purchased as an additional accessory.

Equipment:

+ Inverter semi-automatic
+ MIG welding torch 3 meters
+ Electrode holder with 2 meter cable
+ Ground terminal with 1 meter cable
+ Feed roller (V-type) for steel wire 0.6-0.8 mm (installed in the feed mechanism wire)
+ Feed roller (U-type) for aluminum wire 0.8-1.0 m
+ Feed roller (K-type) for flux-cored wire 0.8-1.0 m
+ Contact tips: 0.8 mm (1 pc., installed on the torch); 0.6 mm (1 piece); 0.8 mm (1 piece)
+ 1.0 mm (1 piece)
+ Contact tips for aluminum: 0.8 mm (1 piece); 1.0 mm (1 piece)
+ Slag removal brush
+ Teflon channel for feeding aluminum wire

Compatible products:

WG-15AK3 MIG/MAG torch Solaris WG-15AK (3 meters)
WG-15AK5 MIG/MAG torch Solaris WG-15AK (5 meters)
WG-25AK3 MIG/MAG torch Solaris WG-25AK (3 meters)
WG-25AK5 MIG/MAG torch Solaris WG-25AK (5 meters)
WGT-17V425 TIG torch Solaris WGT-17V (4 meters)
WM-3506 Contact tip 1.0 mm M6x25 mm E-Cu-Al (set of 5 pcs) SOLARIS
WA-2461 Torch maintenance wrench
33963 Industrial power plug 32A
VP32-922 Industrial power plug 32A
JP7602-01 16 A plug (not suitable for maximum current operation)
SQ0612-0001 16 A plug (not suitable for maximum current operation)

Similar products:

Vend.: SL5712-6
Semi-automatic inverter welder Solaris RTX Black 220
ATTENTION! The machine is supplied without a power plug. For operation at maximum current, the machine must be fitted with a heavy-duty single-phase plug (32A, 230V), which is not included.
icon
516,30 $
5
Vend.: DG5822-9
MIG welder DGM TECMIG-300 SYN
150-240 V~, 30-265 A, MIG/FLUX/MMA/TIG, synergy, euro connector, polarity change, 3 m torch
175,05 $
1
Vend.: SL5712-5
MIG welder SOLARIS TOPMIG-226
160-240 V~, 30-200 A, MIG/FLUX, polarity change, 2T/4T, euro connector, 3 m torch
297,37 $
remainder icon

We use cookies for your convenience in using the site and to improve the quality of recommendations.