We use cookies for your convenience in using the site and to improve the quality of recommendations.
MIG welder SOLARIS MIG-201 (160-240 V~, 10-130 A, MIG/SPOT/FLUX/MMA/TIG, polarity change, 2T/4T, inductance adjustment, 2 m built-in torch)
Vendor code:
MIG-201
Prices
Recommended retail price USD excluding VAT
219,19
$
Remainings
In stock Ningbo
pcs.
Characteristics:
- Wire diameter used
- 0.6–0.8 mm
- Input voltage
- 160–240 V~
- Network type
- 1 phase
- Open circuit voltage
- 80 V
- Power factor
- COS 0.7
- Insulation class
- H
- Protection rating
- IP21S
- Weight (without accessories)
- 9.3 kg
Advantages:
■ Built-in burner 2 m
■ 5 in 1 (MIG / SPOT MIG / FLUX / MMA / TIG lift DC)
■ Microprocessor control
■ The device operates on 4 IGBT transistors, which makes it a reliable solution
■ High operating time of the device 60% at 20 °C
■ Installed coil size up to 5 kg / 200 mm
■ Wire feed/thread button (without voltage supply) - safe for the operator
■ Possibility of changing polarity for welding with wire without gas (FLUX)
■ Stable operation in networks with reduced voltage (from 160 V)
■ 2T/4T mode (for MIG)
■ SPOT welding mode (spot welding with duration from 0.3 to 30 seconds)
■ Adjusting the arc inductance changes the parameters of penetration depth and weld bead shape
■ Arc force adjustment (MMA)
■ Power cable 2 m (without power plug)
■ Noise filter to protect other devices from interference.
| Barcode: | 8213112892032 |
| Dimensions LxWxH, cm: | 62 x 25 x 39 |
| Weight with packaging, kg: | 11.47 |
Description:
Note! The device is supplied without a plug. In case of operation at maximum currents, the device must be equipped with a 32A 230V single-phase power plug (not included). Multifunctional inverter welding machine that allows you to weld in five modes: - mode of semi-automatic welding in a protective gas environment MIGMAG; - SPOT welding mode (spot welding with duration from 0.3 to 30 seconds); - mode of semi-automatic welding with flux-cored wire without the use of FLUX shielding gases; - mode of manual arc welding with coated MMA electrodes; - argon-arc welding mode with direct current LIFT DC TIG (valve-type torch must be purchased separately). The machine is equipped with a built-in 2 meter MIG torch and the ability to change polarity for welding with wire without gas (FLUX). The SPOT spot welding mode is ideal for welding thin sheet metal (for example, car bodies). It is necessary to adjust the welding time of one point, and after that all spot seams will be welded equally well and with high quality.
Equipment:
+ Inverter semi-automatic
+ Welding torch 2 meters
+ Electrode holder with 2 meter cable
+ Ground terminal with 1.5 meter cable
+ Feed roller for wire 0.6-0.8 mm (installed in the wire feed mechanism)
Compatible products:
WM-6110 Anti-stick spray SOLARIS
WM-ER70S6-06010 Wire Solaris ER70S-6 (copper-plated) d0.6mm, 1 kg
Advantages:
■ Built-in burner 2 m
■ 5 in 1 (MIG / SPOT MIG / FLUX / MMA / TIG lift DC)
■ Microprocessor control
■ The device operates on 4 IGBT transistors, which makes it a reliable solution
■ High operating time of the device 60% at 20 °C
■ Installed coil size up to 5 kg / 200 mm
■ Wire feed/thread button (without voltage supply) - safe for the operator
■ Possibility of changing polarity for welding with wire without gas (FLUX)
■ Stable operation in networks with reduced voltage (from 160 V)
■ 2T/4T mode (for MIG)
■ SPOT welding mode (spot welding with duration from 0.3 to 30 seconds)
■ Adjusting the arc inductance changes the parameters of penetration depth and weld bead shape
■ Arc force adjustment (MMA)
■ Power cable 2 m (without power plug)
■ Noise filter to protect other devices from interference.
| Barcode: | 8213112892032 |
| Dimensions LxWxH, cm: | 62 x 25 x 39 |
| Weight with packaging, kg: | 11.47 |
Description:
Note! The device is supplied without a plug. In case of operation at maximum currents, the device must be equipped with a 32A 230V single-phase power plug (not included). Multifunctional inverter welding machine that allows you to weld in five modes: - mode of semi-automatic welding in a protective gas environment MIGMAG; - SPOT welding mode (spot welding with duration from 0.3 to 30 seconds); - mode of semi-automatic welding with flux-cored wire without the use of FLUX shielding gases; - mode of manual arc welding with coated MMA electrodes; - argon-arc welding mode with direct current LIFT DC TIG (valve-type torch must be purchased separately). The machine is equipped with a built-in 2 meter MIG torch and the ability to change polarity for welding with wire without gas (FLUX). The SPOT spot welding mode is ideal for welding thin sheet metal (for example, car bodies). It is necessary to adjust the welding time of one point, and after that all spot seams will be welded equally well and with high quality.
Equipment:
+ Inverter semi-automatic
+ Welding torch 2 meters
+ Electrode holder with 2 meter cable
+ Ground terminal with 1.5 meter cable
+ Feed roller for wire 0.6-0.8 mm (installed in the wire feed mechanism)
Similar products:
Vend.: HD-KNS500-E3
Vend.: MULTIMIG-227
160-240 V~, 10-220 A, MIG/SPOT/FLUX/MMA/TIG, polarity change, 2T/4T, euro connector, 3 m torch
361,69
$
Vend.: AS1570-6
150-240 V~, 20-180 A, FLUX/MMA/TIG LIFT, bayonet connector,gasless welding
90,85
$
Vend.: MIG-205P
160-240 V~, 20-200 A, MIG/FLUX/MMA/TIG, polarity change, 2 m built-in torch
135,24
$
Vend.: MULTIMIG-224
160-240 V~, 10-220 A, MIG/SPOT/FLUX/MMA, polarity change, 2T/4T, euro connector, 3 m torch
293,95
$