We use cookies for your convenience in using the site and to improve the quality of recommendations.
MIG welder SOLARIS MIG-200EM (160-240 V~, 10-180 A, MIG/FLUX/MMA, polarity change, 1 kg reel, 2 m built-in torch)
Vendor code:
MIG-200EM
| Barcode: | 8213112891462 |
| Dimensions LxWxH, cm: | 46.5 x 19 x 30.5 |
| Weight with packaging, kg: | 7.3 |
Prices
Recommended retail price USD excluding VAT
200,67
$
Remainings
In stock Ningbo
pcs.
Characteristics:
- Wire diameter used
- 0.6–0.8 mm
- Input voltage
- 160–240 V~
- Network type
- 1 phase
- Rated input current
- 15.3 A
- Maximum input current
- 26 A
- Power factor
- COS 0.6
- Insulation class
- F
- Protection rating
- IP21S
Advantages:
■ Compact inverter welding machine that allows you to weld in the following modes:
■ semi-automatic welding mode in shielding gases MIG/MAG
■ mode of semi-automatic welding with flux-cored wire without the use of protective gases FLUX
■ manual arc welding mode with coated MMA electrodes
■ The device is equipped with a built-in torch and the ability to change polarity for welding with wire without gas (FLUX).
■ Due to the compact location of the wire feed mechanism (on top), the device is comparable in size to inverters for manual welding.
■ Compact size
■ Built-in burner
■ 2 in 1 (MIG/MMA)
■ Installed coil size 1 kg / 100 mm
■ Transport strap
■ Possibility of changing polarity for welding with wire without gas (FLUX)
■ Wire feed adjustment button
■ Stable operation in networks with reduced voltage (from 160 V)
■ High open circuit voltage for easier arc ignition
■ Power cable 2 m (without power plug)
■ Noise filter to protect other devices from interference.
| Barcode: | 8213112891462 |
| Dimensions LxWxH, cm: | 46.5 x 19 x 30.5 |
| Weight with packaging, kg: | 7.3 |
Description:
Note! The device is supplied without a plug. In case of operation at maximum currents, the device must be equipped with a 32 A 230 V single-phase power plug (not included).
Equipment:
+ Inverter semi-automatic
+ Welding torch 2 meters
+ Electrode holder with 1.6 meter cable
+ Ground terminal with 1.2 meter cable
+ Feed roller for wire 0.6-0.8 mm (installed in the wire feed mechanism)
Compatible products:
WM-6110 Anti-stick spray SOLARIS
33963 Power plug 32A industrial
VP32-922 Power plug 32A industrial
JP7602-01 Plug 16 A (not suitable for work at max currents)
SQ0612-0001 Plug 16 A (not suitable for work at max currents)
Advantages:
■ Compact inverter welding machine that allows you to weld in the following modes:
■ semi-automatic welding mode in shielding gases MIG/MAG
■ mode of semi-automatic welding with flux-cored wire without the use of protective gases FLUX
■ manual arc welding mode with coated MMA electrodes
■ The device is equipped with a built-in torch and the ability to change polarity for welding with wire without gas (FLUX).
■ Due to the compact location of the wire feed mechanism (on top), the device is comparable in size to inverters for manual welding.
■ Compact size
■ Built-in burner
■ 2 in 1 (MIG/MMA)
■ Installed coil size 1 kg / 100 mm
■ Transport strap
■ Possibility of changing polarity for welding with wire without gas (FLUX)
■ Wire feed adjustment button
■ Stable operation in networks with reduced voltage (from 160 V)
■ High open circuit voltage for easier arc ignition
■ Power cable 2 m (without power plug)
■ Noise filter to protect other devices from interference.
| Barcode: | 8213112891462 |
| Dimensions LxWxH, cm: | 46.5 x 19 x 30.5 |
| Weight with packaging, kg: | 7.3 |
Description:
Note! The device is supplied without a plug. In case of operation at maximum currents, the device must be equipped with a 32 A 230 V single-phase power plug (not included).
Equipment:
+ Inverter semi-automatic
+ Welding torch 2 meters
+ Electrode holder with 1.6 meter cable
+ Ground terminal with 1.2 meter cable
+ Feed roller for wire 0.6-0.8 mm (installed in the wire feed mechanism)
Similar products:
Vend.: SL5712-5
160-240 V~, 30-200 A, MIG/FLUX, polarity change, 2T/4T, euro connector, 3 m torch
297,37
$
Vend.: SL5712-6
ATTENTION! The machine is supplied without a power plug. For operation at maximum current, the machine must be fitted with a heavy-duty single-phase plug (32A, 230V), which is not included.
516,30
$
Vend.: DG5822-9
150-240 V~, 30-265 A, MIG/FLUX/MMA/TIG, synergy, euro connector, polarity change, 3 m torch
175,05
$