We use cookies for your convenience in using the site and to improve the quality of recommendations.
MIG welder HDC Kansas 500 (380 V 3~, 40-500 A, MIG/FLUX/MMA, synergy, euro connector)
Vendor code:
HD-KNS500-E3
| Barcode: | 1200229836803 |
| Dimensions LxWxH, cm: | 97 x 46 x 115 |
| Weight with packaging, kg: | 101.62 |
Prices
Recommended retail price USD excluding VAT
1 967,92
$
Remainings
In stock Ningbo
pcs.
Characteristics:
- Wire diameter used
- 0.8 / 1.0 / 1.2 / 1.6 mm
- Network type
- 3 phase
- Open circuit voltage
- 70 V
- Rated input current
- 32.4 A
- Maximum input current
- 41.8 A
- Power factor
- COS 0.92
- Insulation class
- H
- Protection rating
- IP21S
Advantages:
■ 2-in-1: semi-automatic and manual welding
■ Microprocessor control 32-bit ST microprocessor based on ARM architecture
■ remote wire feed module with cable harness 5 meters long range
■ 4-roller wire feeder
■ Synergic and manual mode for MIG/MAG welding
■ Intensive work with wire up to 1.6 mm
■ Works with electrodes up to 8 mm in diameter
■ High duty cycle and efficient cooling for intensive work
■ Two displays for precise control of parameters
■ 2T4T modes,
■ Adjusting arc dynamics
■ 36V connector on the rear panel for connecting the gearbox heating
■ Gas purging after welding for additional protection of the weld seam
■ Transport wheels for easy moving of the welding station
■ Platform for carbon dioxide cylinder
| Barcode: | 1200229836803 |
| Dimensions LxWxH, cm: | 97 x 46 x 115 |
| Weight with packaging, kg: | 101.62 |
Description:
Note! For ease of individualization of the welding machine, the welding torch is not included in the delivery package and must be purchased separately. The device is equipped with a universal EURO connector and can be equipped with any suitable burner. When working with 1.0 mm wire, it is recommended to use a torch of at least 25 series; when working with 1.2 mm wire, it is recommended to use a torch of at least 36 series. Inverter type welding machine for professional use. The device can be used both in semi-automatic welding mode and in manual electrode welding mode. The device is equipped with an external wire feed module with a 4-roller mechanism and a holder for spools with a diameter of up to 300 mm and a wire weight of up to 15 kg. 0.8 mm - only in manual mode. Synergy mode is not available.
Equipment:
+ Power supply
+ Wire feed module
+ Electrode holder with 3 meter cable
+ Ground terminal with 3 meter cable
+ Cable harness for connecting the power source and the wire feed module 5 meters
+ Gas hose 7 meters (as part of the cable harness)
+ Feed roller 1,21,6 mm - 2 pcs (installed in the wire feed mechanism)
+ Feed roller 0.81.0 mm - 2 pcs
Compatible products:
Advantages:
■ 2-in-1: semi-automatic and manual welding
■ Microprocessor control 32-bit ST microprocessor based on ARM architecture
■ remote wire feed module with cable harness 5 meters long range
■ 4-roller wire feeder
■ Synergic and manual mode for MIG/MAG welding
■ Intensive work with wire up to 1.6 mm
■ Works with electrodes up to 8 mm in diameter
■ High duty cycle and efficient cooling for intensive work
■ Two displays for precise control of parameters
■ 2T4T modes,
■ Adjusting arc dynamics
■ 36V connector on the rear panel for connecting the gearbox heating
■ Gas purging after welding for additional protection of the weld seam
■ Transport wheels for easy moving of the welding station
■ Platform for carbon dioxide cylinder
| Barcode: | 1200229836803 |
| Dimensions LxWxH, cm: | 97 x 46 x 115 |
| Weight with packaging, kg: | 101.62 |
Description:
Note! For ease of individualization of the welding machine, the welding torch is not included in the delivery package and must be purchased separately. The device is equipped with a universal EURO connector and can be equipped with any suitable burner. When working with 1.0 mm wire, it is recommended to use a torch of at least 25 series; when working with 1.2 mm wire, it is recommended to use a torch of at least 36 series. Inverter type welding machine for professional use. The device can be used both in semi-automatic welding mode and in manual electrode welding mode. The device is equipped with an external wire feed module with a 4-roller mechanism and a holder for spools with a diameter of up to 300 mm and a wire weight of up to 15 kg. 0.8 mm - only in manual mode. Synergy mode is not available.
Equipment:
+ Power supply
+ Wire feed module
+ Electrode holder with 3 meter cable
+ Ground terminal with 3 meter cable
+ Cable harness for connecting the power source and the wire feed module 5 meters
+ Gas hose 7 meters (as part of the cable harness)
+ Feed roller 1,21,6 mm - 2 pcs (installed in the wire feed mechanism)
+ Feed roller 0.81.0 mm - 2 pcs
Similar products:
Vend.: MIG-205P
160-240 V~, 20-200 A, MIG/FLUX/MMA/TIG, polarity change, 2 m built-in torch
135,24
$
Vend.: MIG-201
160-240 V~, 10-130 A, MIG/SPOT/FLUX/MMA/TIG, polarity change, 2T/4T, inductance adjustment, 2 m built-in torch
219,19
$
Vend.: AS1570-6
150-240 V~, 20-180 A, FLUX/MMA/TIG LIFT, bayonet connector,gasless welding
90,85
$
Vend.: SL5712-5
160-240 V~, 30-200 A, MIG/FLUX, polarity change, 2T/4T, euro connector, 3 m torch
253,38
$
Vend.: MIG-200EM
160-240 V~, 10-180 A, MIG/FLUX/MMA, polarity change, 1 kg reel, 2 m built-in torch
182,43
$