We use cookies for your convenience in using the site and to improve the quality of recommendations.
MIG welder SOLARIS MULTIMIG-245
Vendor code:
SL5712-3
| Barcode: | 6977125192689 ( ) |
| Dimensions LxWxH, cm: | 55 x 33 x 50.5 |
| Weight with packaging, kg: | 20 |
Prices
Recommended retail price USD excluding VAT
386,22
$
Remainings
In stock Ningbo
pcs.
Characteristics:
- Wire diameter used
- 0.6-1.0 m
- Gas fitting
- 9 mm
- Input voltage
- 160–240 V~
- Network type
- 1 phase
- Rated input current
- 21.3 A
- Maximum input current
- 36 A
- Power factor
- COS 0.65
- Insulation class
- H
Advantages:
■ FUNCTIONS AND SETTINGS:
■ 5 welding modes: MIG / SPOT MIG / FLUX / MMA / LIFT TIG
■ Synergetic semi-automatic settings. Set the wire diameter and material type. The device adapts to the specified parameters
■ Adjusting the inductance (softness) of the arc (MIG)
■ Setting the welding time for SPOT MIG mode
■ Adjustable Hot Start (MMA)
■ Setting pre-gas, post-gas, arc burn (Burn Back)
■ Slowing down the wire speed before welding Start WFS
■ Wire feed adjustment mode
■ Gas supply test mode
■ Welding with short or long seams (2T/4T)
■ TECHNICAL
■ Microprocessor control
■ SMART COOLING function - the cooling fan starts only when the internal components heat up
■ 2 displays and additional settings indicators - maximum ease of setup and control of operation
■ Modern architecture ensures stable operation and reliability of the device
■ Metal wire feeder
■ Change of polarity for welding without gas (FLUX)
■ The device is equipped with a Euro connector for MIG torches
■ Oversized 35-50 (13mm) power terminals can withstand intense loads
| Barcode: | 6977125192689 ( ) |
| Dimensions LxWxH, cm: | 55 x 33 x 50.5 |
| Weight with packaging, kg: | 20 |
Equipment:
+ Inverter semi-automatic
+ Welding torch 3 meters
+ Electrode holder with 3 meter cable
+ Ground terminal with 3 meter cable
+ Gas hose 2 meters
+ Tie clamp 2 pcs
+ Feed roller for V-type wire 0.6-0.8 mm (installed in the wire feed mechanism)
+ Feed roller for K-type wire 0.8-1.0 mm (optional for FLUX cored wire)
+ Set of spare contact tips (0.6 mm - 3 pcs. 0.8 mm - 5 pcs. 1.0 mm - 5 pcs)
+ Burner maintenance key
Advantages:
■ FUNCTIONS AND SETTINGS:
■ 5 welding modes: MIG / SPOT MIG / FLUX / MMA / LIFT TIG
■ Synergetic semi-automatic settings. Set the wire diameter and material type. The device adapts to the specified parameters
■ Adjusting the inductance (softness) of the arc (MIG)
■ Setting the welding time for SPOT MIG mode
■ Adjustable Hot Start (MMA)
■ Setting pre-gas, post-gas, arc burn (Burn Back)
■ Slowing down the wire speed before welding Start WFS
■ Wire feed adjustment mode
■ Gas supply test mode
■ Welding with short or long seams (2T/4T)
■ TECHNICAL
■ Microprocessor control
■ SMART COOLING function - the cooling fan starts only when the internal components heat up
■ 2 displays and additional settings indicators - maximum ease of setup and control of operation
■ Modern architecture ensures stable operation and reliability of the device
■ Metal wire feeder
■ Change of polarity for welding without gas (FLUX)
■ The device is equipped with a Euro connector for MIG torches
■ Oversized 35-50 (13mm) power terminals can withstand intense loads
| Barcode: | 6977125192689 ( ) |
| Dimensions LxWxH, cm: | 55 x 33 x 50.5 |
| Weight with packaging, kg: | 20 |
Equipment:
+ Inverter semi-automatic
+ Welding torch 3 meters
+ Electrode holder with 3 meter cable
+ Ground terminal with 3 meter cable
+ Gas hose 2 meters
+ Tie clamp 2 pcs
+ Feed roller for V-type wire 0.6-0.8 mm (installed in the wire feed mechanism)
+ Feed roller for K-type wire 0.8-1.0 mm (optional for FLUX cored wire)
+ Set of spare contact tips (0.6 mm - 3 pcs. 0.8 mm - 5 pcs. 1.0 mm - 5 pcs)
+ Burner maintenance key