We use cookies for your convenience in using the site and to improve the quality of recommendations.
Plasma cutter SOLARIS EasyCut PC-41
Code:
1037248
Vendor code:
PC-41
| Barcode: | 8213112891288 ( ) |
| Dimensions LxWxH, cm: | 46.5 x 22.5 x 31 |
| Weight with packaging, kg: | 7.9 |
Prices
Wholesale
213,27
$
Remainings
In stock Ningbo
pcs.
Advantages:
230 V; 15-40 A; High voltage start
| Barcode: | 8213112891288 ( ) |
| Dimensions LxWxH, cm: | 46.5 x 22.5 x 31 |
| Weight with packaging, kg: | 7.9 |
Equipment:
Advantages: - IGBT inverter technology; - High-voltage contact ignition; - Torch with ergonomic handle included; - Air flow regulator included; - Foldable carrying handle; - Quick-release fitting for connecting a standard air hose; - Network cable 2 m; - EMC filter according to IEC 60974-10. Attention! The device is supplied without a plug. In case of operation at maximum currents, the device must be equipped with a single-phase power plug 32A 230V (not included) Requires connection to an air compressor with an air capacity of at least 150 l/min. --- Specifications: Supply voltage : 220-240 V; Frequency: 50/60 Hz; Mains type: 1 phase; Open circuit voltage: 270 V; Rated output: 15-40 A; Duty cycle (DC) at max. current: ; 40°C (IEC 60974-1): 35%; 20°C: 60%; Nominal input current: 14.8 A; Maximum allowable input current: 25 A; Maximum cutting thickness: 15 mm; Cutting thickness of non-ferrous metals: 9 mm; Capacity of the connected compressor: > 150 l/min; Nominal operating pressure of the compressor: 4.5-6 bar; Efficiency, n: 0.91; Power factor: Cos phi 0.91; Insulation class : F; Degree of protection: IP21S; Weight (without accessories) tey): 5.6 kg; Weight (with accessories): 7.0 kg; Overall dimensions: 42x12x26 cm; Warranty: 12 months; --- Complete set: Plasmorez - 1 pc. Plasma cutter 2.5 m with accessories - 1 pc. Ground terminal with cable 2 m - 1 pc. Air pressure regulator (installed on the machine) - 1 pc. Instruction manual - 1 pc. --- Compatible products: WGC- 3130 Plasma cutter 3 m; WGC-3150 Plasma cutter 5 m; WA-3941 Insulating diffuser; WA-3940 Protective cap; WA-3942 Nozzle (set of 5 pcs); WA-3943 Elongated nozzle*** ( set of 5 pcs); WA-3944 Electrode (set of 5 pcs); WA-3945 Elongated electrode*** (set of 5 pcs); AHF-108 Reinforced hose ECO 10 m; AHF-158 Reinforced hose ECO 15 m ; AHU-0580 ECO spiral hose 5 m; AHU-1080 ECO spiral hose 10 m; AHU-1580 ECO spiral hose 15 m; --- *** Note: the extended nozzle is used in tandem with the extended electrode.
Advantages:
230 V; 15-40 A; High voltage start
| Barcode: | 8213112891288 ( ) |
| Dimensions LxWxH, cm: | 46.5 x 22.5 x 31 |
| Weight with packaging, kg: | 7.9 |
Equipment:
Advantages: - IGBT inverter technology; - High-voltage contact ignition; - Torch with ergonomic handle included; - Air flow regulator included; - Foldable carrying handle; - Quick-release fitting for connecting a standard air hose; - Network cable 2 m; - EMC filter according to IEC 60974-10. Attention! The device is supplied without a plug. In case of operation at maximum currents, the device must be equipped with a single-phase power plug 32A 230V (not included) Requires connection to an air compressor with an air capacity of at least 150 l/min. --- Specifications: Supply voltage : 220-240 V; Frequency: 50/60 Hz; Mains type: 1 phase; Open circuit voltage: 270 V; Rated output: 15-40 A; Duty cycle (DC) at max. current: ; 40°C (IEC 60974-1): 35%; 20°C: 60%; Nominal input current: 14.8 A; Maximum allowable input current: 25 A; Maximum cutting thickness: 15 mm; Cutting thickness of non-ferrous metals: 9 mm; Capacity of the connected compressor: > 150 l/min; Nominal operating pressure of the compressor: 4.5-6 bar; Efficiency, n: 0.91; Power factor: Cos phi 0.91; Insulation class : F; Degree of protection: IP21S; Weight (without accessories) tey): 5.6 kg; Weight (with accessories): 7.0 kg; Overall dimensions: 42x12x26 cm; Warranty: 12 months; --- Complete set: Plasmorez - 1 pc. Plasma cutter 2.5 m with accessories - 1 pc. Ground terminal with cable 2 m - 1 pc. Air pressure regulator (installed on the machine) - 1 pc. Instruction manual - 1 pc. --- Compatible products: WGC- 3130 Plasma cutter 3 m; WGC-3150 Plasma cutter 5 m; WA-3941 Insulating diffuser; WA-3940 Protective cap; WA-3942 Nozzle (set of 5 pcs); WA-3943 Elongated nozzle*** ( set of 5 pcs); WA-3944 Electrode (set of 5 pcs); WA-3945 Elongated electrode*** (set of 5 pcs); AHF-108 Reinforced hose ECO 10 m; AHF-158 Reinforced hose ECO 15 m ; AHU-0580 ECO spiral hose 5 m; AHU-1080 ECO spiral hose 10 m; AHU-1580 ECO spiral hose 15 m; --- *** Note: the extended nozzle is used in tandem with the extended electrode.