MIG welder SOLARIS MULTIMIG-245 (160-240 V~, 20-240 A, MIG/FLUX/SPOT/MMA/TIG, polarity change, 2T/4T, inductance adjustment, euro connector, 3 m torch)
Vendor code: SL5712-3
Characteristics
- Wire diameter used
- 0.6–1.0 m
- Gas fitting
- 9 mm
- Input voltage
- 160–240 V~
- Network type
- 1 phase
- Rated input current
- 21.3 A
- Maximum input current
- 36 A
- Power factor
- COS 0.65
- Insulation class
- H
- Protection rating
- IP21S
- Weight (without accessories)
- 15.2 kg
- Network plug included
- no
- Mains Frequency
- 50 Hz
- Rated power consumption at maximum current
- 4.9 kW
- MMA Welding Current
- 30–200 A
- Efficiency
- 0.8
- Overall dimensions (L x W x H)
- 483 x 229 x 461 mm
- Recommended generator Power
- 8.3 kV A
- TIG Welding Current
- 20–240 A
- Electrode diameter
- 1.6–5.0 mm
- MIG Welding Current
- 30–240 A
- at 40 °C
- 35% (EN 60974–1)
- at 20 °C
- 60%
- TIG electrode diameter
- 0.5–3.2 mm
- Warranty period
- 24 months
Description:
Advantages:
Description:
An updated version of the popular model among many craftsmen, MULTIMIG-245 boasts expanded functionality and amazing control of processes during welding. DEVICE MODES: - semi-automatic welding mode in MIG/MAG shielding gases; - mode of semi-automatic welding with flux-cored wire without the use of FLUX shielding gases; - mode of manual arc welding with coated MMA electrodes; - argon-arc welding mode with direct current LIFT DC TIG (valve-type torch must be purchased separately). The device is equipped with a EURO connector, a 3 meter MIG torch and the ability to change polarity for welding with wire without gas (FLUX). Note! The device is supplied without a plug. In case of operation at maximum currents, the device must be equipped with a 32A 230V single-phase power plug (not included). Note! Some accessories (torch, gas hose, spare contact tips, tie clamp) are located inside the wire feed compartment.