Mon.-Fri. from 9:00 to 17:00 (CST)
MIG welder SOLARIS TOPMIG-226 (160-240 V~, 30-200 A, MIG/FLUX, polarity change, 2T/4T, euro connector, 3 m torch)
Vendor code: SL5712-5
Characteristics
- Nominal supply voltage
- ~ 230 V
- Permissible supply voltage range
- ~ 160–~ 240 V
- Supply Frequency
- 50 Hz
- Network type
- 1 phase
- Open circuit voltage
- 89 V
- Welding current (MIG)
- 30–200 A
- Nominal wire feed speed
- 2–11 m/min
- Duty cycle (DC) at max. current
- at 40 ° C
- 20 % (EN 60974–1)
- at 20 ° C
- 60 %
- Rated input current
- 16.7 A
- Maximum permissible input current
- 37.3 A
- Nominal power consumption at max. current
- 3.8 kW
- Recommended generator Power
- 8.5 kVA
- MIG/MAG welding wire diameter
- 0.6–1.0 mm
- FLUX welding wire diameter
- 0.8–1.0 mm
- Efficiency
- 0.80
- Power factor
- COS 0.7
- Insulation class
- F
- Protection class
- IP21S
- Network plug included
- no
- Weight (without accessories)
- 9.3 kg
- Overall dimensions (L x W x H)
- 430 x 210 x 335 mm
- Warranty period
- 36 months
Description:
Advantages:
■ Euro connector for the torch;
■ - Torch WG-15AK (3 meters) included;
■ - Size of the installed coil up to 5 kg / 200 mm;
■ - Possibility of changing the polarity for welding with wire without gas (FLUX);
■ - Wire feed adjustment function;
■ - 2T/4T mode (for MIG);
■ - IGBT transistors;
■ - Metal wire feed mechanism;
Description:
Inverter welding machine that allows welding in the following modes: - semi-automatic welding mode in a protective gas environment MIG/MAG; - semi-automatic welding mode with flux-cored wire without the use of protective gases FLUX; The device is equipped with a Euro connector for the torch, the ability to change the polarity for welding with wire without gas (FLUX); Attention! The torch in this model is supplied in a separate box;
Equipment:
+ Inverter semiautomatic
+ Welding torch WG-15AK 3 meters
+ Gas hose with two clamps
+ Ground terminal with cable 2 meters
+ Feed roller for V-type wire 0.6 - 0.8 mm (installed in the wire feed mechanism), feed roller for K-type wire 0.8 - 1.0 mm
+ Contact tubes (tips) 0.8 mm (1 pc., installed on the torch), 0.8 mm (1 pc.), 1.0 mm (1 pc.)
+ Sealing ring for contact tube (tip) (2 pcs)
+ Documentation
+ Box for welding torch
+ Box