Mon.-Fri. from 9:00 to 17:00 (CST)
MIG welder DGM DUOMIG-255E (150-240 V~, 30-250 A, MIG/FLUX/MMA/TIG, polarity change, euro connector, 3 m torch)
Vendor code: DG5822-5
Characteristics
- Wire diameter used
- 0.6–1.0 mm
- Input voltage
- 150–240 V~
- Network type
- 1 phase
- Open circuit voltage
- 60 V
- Rated input current
- 19.9 A
- Maximum input current
- 44.6 A
- Power factor
- COS 0.85
- Insulation class
- F
- Protection rating
- IP21S
- Weight (without accessories)
- 9.4 kg
- Network plug included
- No
- Mains Frequency
- 50 Hz
- MMA Welding Current
- 250 A/30 V
- Efficiency
- 0.91
- MIG Welding Current
- 250 A/26.5 V
- TIG Welding Current
- 250 A/20 V
- Output current range
- 30–250 A
- 40°C (IEC 60974–1)
- 20%
- 20°C
- 60%
- Rated power consumption at max current
- 4.6 kW
- Electrode diameter
- 1.6–4.0 mm
- Non-consumable electrode diameter
- 1.0–2.4 mm
- Warranty period
- 12 months
Description:
Advantages:
■ 3-in-1: semi-automatic welding, manual electrode welding, TIG welding
■ welding torch with euro connector included
■ polarity change cable for welding in shielding gases or with FLUX cored wire
■ 2 displays display current and voltage parameters during setup, and also display measured values ??during welding.
■ for semi-automatic welding: 2T/4T modes
■ arc dynamics adjustment for MIG mode
■ maximum wire spool size 5 kg/200 mm
Description:
Note! The device is supplied without a plug. In case of operation at maximum currents, the device must be equipped with a 32A 230V single-phase power plug (not included).
Equipment:
+ Semi-automatic welding
+ MIG welding torch - 3 meters
+ Grounding terminal - 1.6 meters
+ Electrode holder MMA - 1.8 meters
+ Contact tip 0.8 mm. - 1 piece
+ Contact tip 1.0 mm. - 1 piece
+ Operation manual