Thermal imager BULL TIC 1290 (120x90, 25 Hz, -20°C...+550°C)
Vendor code: 1323695
Characteristics
- Infrared resolution
- 120x90
- Spectral range
- 8~14 ?m
- Frame refresh rate
- 25 Hz
- Minimum focal length
- 3.2 mm
- Maximum accurate measurement range
- 0.5 m
- Spatial resolution (IFOV)
- 3.75 mrad
- Pixel size
- 12 ?m
- Palettes
- 5 pcs.
- Connection to computer
- Yes
- Temperature sensitivity
- 50 ?m
- Temperature measurement range
- -20°C…+550°C
- Accuracy
- ±2°C or ±2%, whichever is greater (measured temperature is greater than 0°C, ambient temperature 15°C ~ 30°C)
- Resolution
- 0.1°C
- Measurements
- Tracking central / hot / cold spot
- Emissivity
- Adjustable from 0.01 to 1.00
- Total number of pixels
- 300,000 pixels
- Display
- 2.4 inches (TFT)
- Internal memory
- 4 GB of internal memory
- Supported formats (photo/video)
- JPG/MP4
- Export photos/videos to computer
- Supported
- Built-in languages
- English, Chinese, German, Italian, Russian, Japanese
- Battery
- 18650 (Li-ion) - 3.7 V
- Battery capacity
- 2000 mAh
- Working time
- Up to 7 hours (depending on the intensity of use)
- Storage temperature
- -20°C ~ 60°C
- Working temperature
- -10°C ~ 50°C
- Protection rating
- IP54
- Dimensions
- 96 x 72 x 226 mm
Description:
Advantages:
Description:
The thermal imager is designed to detect defects that have arisen during repairs, control moisture penetration into the room, conduct insulation tests, determine the temperature and many others. The tool has a digital camera, as well as an IR sensor for creating both digital images and thermograms. There is the ability to shoot video in MP4 format. High resolution of the IR image is achieved by processing data from the detector (120x90 pixels). There is also a function for automatic recognition of hot and cold spots. Critical temperature points are visible directly on the display of the thermal imager. The received data can be saved as pictures. Pictures and videos are saved to the internal memory of the device, the capacity of which reaches 4 GB, which is equivalent to approximately 400 minutes of continuous video. In the mode menu, you can select 5 overlay palettes, a high-contrast color palette is used in situations where it is necessary to show the thermal contrast between low and high temperatures. It has a built-in 3.7 V battery. The range of measured temperatures is -20 ° C ... + 550 ° C. The thermal imager is used in construction, has a plastic case. It has an adjustable emissivity (initially set to 0.95) for more accurate determination of the temperatures of various materials. When connecting the thermal imager to a computer, there is the possibility of additional analysis of photographs.