Bath faucet brass D35, series NEO AV Engineering (Short monolithic L-spout, length 165 mm, shower head and hose included)
Vendor code: AVNEO3-A170-130
Characteristics
- Material
- Brass
- Casting type
- Sand casting
- Color
- Chrome
- Installation method
- Horizontal, on S-shaped eccentric
- Connection thread, inch
- 3/4"
- Shut-off valve
- Ceramic cartridge
- Cartridge
- ECO-cartridge, three-stage
- Vertical handle rotation angle
- 25°
- Horizontal handle rotation angle
- 50°
- Height, mm
- 105
- Depth, mm
- 187
- Width, mm
- 210
- Distance between eccentrics, mm
- 150 +/- 15
- Spout
- Solid
- Spout length, mm
- 165
- Shower head
- 3 modes, ABS plastic
- Shower head size, mm
- Shower head diameter, inch
- 1/2"
- Shower hose
- 150 cm, stainless steel
- Shower hose diameter, inch
- 1/2"
- Water flow rate, l/min
- 10
- Warranty, years
- 5
Description:
AV Engineering Brass Faucet — quality accessible to everyone. AV Engineering combines classic style and relevant design solutions. The faucets are made from a solid-cast A58 body, which is resistant to water hammer and safe for drinking water. The service life of the solid-cast body is from 15 years. Ceramic ECO-cartridge is a reliable solution with a calculated lifespan of 500,000 cycles or 25+ years of active use. High-quality two-layer electroplated coating according to the EN 248 standard: - Nickel (5–7 µm); - Chrome (0.3 µm). The coating is scratch-resistant (ISO 1518 test). Aerator with a flow rate of 5.7 l/min (Class A EU Regulation 66/2014) – saves up to 30% of water without loss of pressure. Quality control at all stages: - 2000 switching cycles under a pressure of 15 bar (3 times higher than the norm); - 7 days in a salt spray chamber (instead of the standard 4) – guarantees protection against corrosion; - Extreme temperature tests (-20°C to +120°C) – no cracks or deformations; - Wear resistance test – 500 cycles with sand in water and impact loads.