MIG welder SOLARIS ALUMIG-230DP SYNERGY (160-240 V~, 10-200 A, MIG/SPOT/FLUX/MMA/TIG/PULSE/DP, synergy, euro connector, 3 m torch)
Vendor code: SL1539-2
Characteristics
- Wire diameter used
- 0.6–1.0 mm
- Gas fitting
- 9 mm
- Input voltage
- 160–240 V~
- Network type
- 1 phase
- Open circuit voltage
- 80 V
- Rated input current
- 11.5 A
- Maximum input current
- 25.6 A
- Power factor
- COS 0.7
- Insulation class
- H
- Protection rating
- IP21S
- Weight (without accessories)
- 9.5 kg
- Network plug included
- no
- Mains Frequency
- 50 Hz
- at 40°C
- 20% (EN 60974–1)
- at At 20°C
- 60%
- Rated power consumption at maximum current
- 3.1 kW
- MMA Welding Current
- 10–140 A
- Efficiency
- 0.8
- Overall dimensions (L x W x H)
- 430 x 210 x 335 mm
- TIG Welding Current
- 10–200 A
- Electrode diameter
- 1.6–4.0 mm
- MIG Welding Current
- 30–200 A
- TIG electrode diameter
- 0.5–3.2 mm
- Total power output
- 6.9 kV A
- Warranty period
- 24 months
Description:
Advantages:
Description:
Note! The device is supplied without a plug. In case of operation at maximum currents, the device must be equipped with a 32A 230V single-phase power plug (not included). Description of modes: Synergetic programs allow you to configure the semi-automatic machine in two steps, even for an inexperienced user. Set the material to be welded, its thickness and wire diameter - the machine will set all other settings itself. The pulse mode allows you to weld thin metals due to less heat input, and the double pulse mode is especially good for welding aluminum. The machine comes with a set of accessories for welding aluminum. Semi-automatic welding with manual settings for experienced users. In this mode, the device is configured in the classical way - voltage and wire feed speed. Semi-automatic welding with adjustable welding time. The mode is useful for many identical spot welds, or when spot welding thin metals to avoid overheating and deformation. Semi-automatic welding with flux-cored wire without the use of shielding gas. Semi-automatic welding using a torch with a built-in wire feed mechanism. The SPOOL GUN is available as an additional accessory. Classic manual arc welding with a covered electrode. Adjustments for the hot start, arc force and VRD safe no-load voltage functions are available. Argon arc welding with tungsten electrode with touch ignition. A valve-type TIG torch is purchased as an additional accessory.