Mon.-Fri. from 9:00 to 17:00 (CST)
MIG welder SOLARIS MULTIMIG-224 (160-240 V~, 10-220 A, MIG/SPOT/FLUX/MMA, polarity change, 2T/4T, euro connector, 3 m torch)
Vendor code: MULTIMIG-224
Characteristics
- Supply voltage
- ~ 160–240 V
- Mains Frequency
- 50/60 Hz
- Mains type
- 1 phase
- Open circuit voltage
- 67 V
- Rated output (MIG)
- 20–220 A
- Rated output (MMA)
- 10–200 A
- Rated wire feed speed
- 1.5–9.1 m/min
- Duty cycle (DW) at max. current
- at 40°C
- 35% (EN 60974–1)
- at 20°C
- 60%
- Rated input current
- 16 A
- Maximum admissible input current
- 28 A
- Rated power consumption at max. current
- 3.4 kW
- Recommended generator Power
- 6.5 kVA
- Wire diameter used
- 0.6–1.0 mm
- Electrode diameter
- 1.6–4.0 mm
- Efficiency
- 0.91
- Power factor
- COS 0.87
- Insulation class
- H
- Protection class
- IP21S
- Gas fitting
- 9 mm
- Weight (without accessories)
- 14.3 kg
- Overall dimensions (L x W x H)
- 440 x 197 x 340 mm
- Warranty period
- 36 months
Description:
Advantages:
■ Inverter welding machine that allows welding in semi-automatic MIG / MAG / FLUX mode and in manual arc (MMA) welding mode. The device is equipped with a Euro socket for a torch, the possibility of changing the polarity for welding with a wire without gas (FLUX). The device is built using IGBT-transistors, has a set of functions HOT START, ANTISTICK; has protection against overheating, overload.
■ The device is equipped with the SPOT function - semi-automatic spot welding. It is enough to set the required welding time (from 0.1 to 10 seconds) - you will get guaranteed the same result for all welded points.
■ ---
■ Advantages:
■ - Euro socket for the torch;
■ - 3 meter torch included;
■ - 2-in-1 - semi-automatic and manual arc welding;
■ - Installed coil size up to 5 kg / 200 mm;
■ - Possibility change of polarity for welding with wire without gas (FLUX);
■ - Stable operation in networks with low voltage (from 160V);
■ - 2T / 4T function for MIG mode;
■ - SPOT spot welding mode from 0.1 to 10 seconds for |MIG mode );
■ - IGBT transistors;
■ - Metal wire feeder;
■ - Aluminum casing increases the corrosion resistance of the device;
■ - Aluminum carrying handle.
■ ---
■ ---
■ Compatible items:
■ WM-6110 Anti-stick spray SOLARIS;
■ WG-15AK3 MIG/MAG Torch Solaris WG-15AK (3 meters);
■ WG-15AK5 MIG/MAG Torch Solaris WG-15AK (5 meters);
■ WG-25AK3 MIG/MAG Torch Solaris WG-25AK (3 meters);
■ WG-25AK5 Torch MIG/MAG Solaris WG-25AK (5 meters);
■ WA-3477 Torch spring* ;
■ WA-3473 Burner nozzle* ;
■ WA-2471 Feed roller 0.6-0.8mm;
■ WA-2472 Feed roller 0.8-1.0mm ;
■ WA-3474 Contact tube (tip) 0.6 mm* ;
■ WA-3475 Contact tube (tip) 0.8 mm* ;
■ WA-3476 Contact tube (tip) 1.0 mm* ;
■ WA-3479 Torch neck (gander)* ;
■ WA-3480 Spiral wire channel 0.8-1.0 mm for torch 3 m ;
■ WA-3481 Spiral wire channel 0 .8-1.0 mm for 5 m torch ;
■ WA-3498 Spiral wire duct 1.0-1.2 mm for 3 m torch ;
■ WA-3499 Spiral wire duct 1.0-1.2 mm for torch 5 m ;
■ WA-2461 Wrench for welding torch maintenance ;
■ WA-2475 front panel of the machine) ;
■ WA-2473 Welding connector (for welding cable) ;
■ E-160C Ground terminal 160A E-160C Solaris;
■ E-200C Ground terminal 200A E-200C Solaris;
■ E-300C Ground terminal 300A E- 300C Solaris;
■ E-500C Ground terminal 500А E-500C Solaris;
■ H-300C Electrode holder Solaris H-300С;
■ H-500C Electrode holder Solaris H-500С;
■ ---
■ *when using burner type 15AK
Equipment:
+ Inverter semi-automatic
+ Welding torch 3 meters
+ Electrode holder with cable 2 meters
+ Ground terminal with cable 2 meters
+ Gas hose 2 meters
+ Feed roller for wire 0.6-0.8 mm (installed in the wire feeder)