Mon.-Fri. from 9:00 to 17:00 (CST)
MIG welder SOLARIS MIG-200EM (160-240 V~, 10-180 A, MIG/FLUX/MMA, polarity change, 1 kg reel, 2 m built-in torch)
Vendor code: MIG-200EM
Characteristics
- Wire diameter used
- 0.6–0.8 mm
- Input voltage
- 160–240 V~
- Network type
- 1 phase
- Rated input current
- 15.3 A
- Maximum input current
- 26 A
- Power factor
- COS 0.6
- Insulation class
- F
- Protection rating
- IP21S
- Weight (without accessories)
- 7.3 kg
- Network plug included
- no
- Mains Frequency
- 50/60 Hz
- at 40°С
- 35% (EN 60974–1)
- at At 20°C
- 60%
- Rated power consumption at maximum current
- 4.4 kW
- MMA Welding Current
- 10–160 A
- Efficiency
- 0.8
- Overall dimensions (L x W x H)
- 345 x 147 x 270 mm
- Recommended generator Power
- 6.5 kV/A
- Electrode diameter
- 1.6–4.0 mm
- MIG Welding Current
- 30–180 A
- Open circuit voltage (MIG)
- 59.5 V
- Open circuit voltage (MMA)
- 84.5 V
- Warranty period
- 24 months
Description:
Advantages:
■ Compact inverter welding machine that allows you to weld in the following modes:
■ semi-automatic welding mode in shielding gases MIG/MAG
■ mode of semi-automatic welding with flux-cored wire without the use of protective gases FLUX
■ manual arc welding mode with coated MMA electrodes
■ The device is equipped with a built-in torch and the ability to change polarity for welding with wire without gas (FLUX).
■ Due to the compact location of the wire feed mechanism (on top), the device is comparable in size to inverters for manual welding.
■ Compact size
■ Built-in burner
■ 2 in 1 (MIG/MMA)
■ Installed coil size 1 kg / 100 mm
■ Transport strap
■ Possibility of changing polarity for welding with wire without gas (FLUX)
■ Wire feed adjustment button
■ Stable operation in networks with reduced voltage (from 160 V)
■ High open circuit voltage for easier arc ignition
■ Power cable 2 m (without power plug)
■ Noise filter to protect other devices from interference.
Description:
Note! The device is supplied without a plug. In case of operation at maximum currents, the device must be equipped with a 32 A 230 V single-phase power plug (not included).
Equipment:
+ Inverter semi-automatic
+ Welding torch 2 meters
+ Electrode holder with 1.6 meter cable
+ Ground terminal with 1.2 meter cable
+ Feed roller for wire 0.6-0.8 mm (installed in the wire feed mechanism)