MIG welder HDC Kansas 500 (380 V 3~, 40-500 A, MIG/FLUX/MMA, synergy, euro connector)
Vendor code: HD-KNS500-E3
Characteristics
- Wire diameter used
- 0.8 / 1.0 / 1.2 / 1.6 mm
- Network type
- 3 phase
- Open circuit voltage
- 70 V
- Rated input current
- 32.4 A
- Maximum input current
- 41.8 A
- Power factor
- COS 0.92
- Insulation class
- H
- Protection rating
- IP21S
- Weight (without accessories)
- 79 kg
- Mains Frequency
- 50/60 Hz
- at At 20°C
- 95%
- Rated input voltage
- 380 V
- MMA Welding Current
- 40 A 21.6 V–490 A 39.6 V
- Efficiency
- 0.85
- Overall dimensions (L x W x H)
- 840 x 320 x 1340 mm
- at 40°C (EN 60974–1)
- 60%
- Electrode diameter
- 2.5–8.0 mm
- MIG/MAG Welding current
- 40 A 16 V–500 A 39 V
- Warranty period
- 12 months
Description:
Advantages:
Description:
Note! For ease of individualization of the welding machine, the welding torch is not included in the delivery package and must be purchased separately. The device is equipped with a universal EURO connector and can be equipped with any suitable burner. When working with 1.0 mm wire, it is recommended to use a torch of at least 25 series; when working with 1.2 mm wire, it is recommended to use a torch of at least 36 series. Inverter type welding machine for professional use. The device can be used both in semi-automatic welding mode and in manual electrode welding mode. The device is equipped with an external wire feed module with a 4-roller mechanism and a holder for spools with a diameter of up to 300 mm and a wire weight of up to 15 kg. 0.8 mm - only in manual mode. Synergy mode is not available.